Instruction

vince · vince

...with the strike-o-matic! -- Edited by vince on Wednesday 15th of April 2009 09:07:18 AM -- Edited by vince on Wednesday 15th of April 2009 09:08:33 AM

Nohackle · Nohackle

I recently tested the knots I have been using for many, many years. I discovered that the knots Ive been using were not as strong as they could have been. The three knots I tested were the three knots that I use most frequently: the improved clinch, the blood knot and the duncan loop. For my test I used 5X Um...

cole · cole

Has anyone built a pram before? Something I have wanted to do for awhile now. There are tons of plans on line but I'm not sure where to start. This sort of piggy backs on the tube versus pontoon question. I have a tube already and thought about getting a pontoon but I want one I can stand in that has a lean bar....

Lahontan · Lahontan

Hi Gang, I've not posted in a while ... simply not had time to get out. But, I am seriously thinking about getting a float tube. Kind of excited about it!� Any advice on brand? Approach to learning? Safety?� (I plan to wear some sort of appropriate floatation device... I am a pretty strong swimmer, but no...

WT · WT

Well I'll admit I am a bit embarrassed to ask this question, but hell that's what the board is for, right?� Anyways I was out fishing the lower american last night and I was having a hell of a time getting my leech patterns tied with rabbit strips to sink, and I was having a hard time getting a few of my all mar...

throwinmetal · throwinmetal

The water is not moving. How do I fly fish a lake? Let it drift around. Make it move? dry or nymph. target = lmb dankes!

shon42073 · shon42073

Yesterday I was fishing and the threaded part of the reel seat came off my rod. I stuck it back on and it seems ok but I want to glue it to be sure. Any suggestions on what a profesional rod builder would use ? This was pretty disapointing since this is a very expensive fly rod. It has a lifetime warranty but do...

catchandrelease · catchandrelease

Single hand spey or trick casting can be done with any weight rod.� I have done it on different weight rods.� The key to doing it right or smoothly is to understand that while doing the spey cast, one must use the water as an anchor.� To do it all from my own personal perspective, one must learn the SWITCH CA...

throwinmetal · throwinmetal

I can kinda do the spey casting with my 5wt Sage. But I can't do it well with my 9wt. Its a 9foot 9wt Echo classic with WF9F Rio Clouser line + a shooting basket. I understand that one needs to have moving water, but is there anything else to consider? Is my gear too heavy? Do I need a particular type of line tap...

SCM · SCM

Lately I have been really interested in fishing soft hackle flies.�However, I am not exactly sure how to rig or fish soft hackle flies. I tried fishing�a few soft hackle flies�this past�Sunday.� I used a standard 9-foot tapered leader with one fly and small piece of shot about 15-inches above. I fish...

WT · WT

After thinking about it for awhile, and talking about it with my wife almost nightly for too long, she got me a G.Loomis GL3 to build.� Does anyone have any hints for a first time rod builder?� I looked at the directions today, and well they are about as helpful as a turd in a punch bowl.� Thanks for any help...

Tug · Tug

When does a strike indicator become just a bobber?� I have never used strike indicators and I have nothing against them but, I saw a guy today using� a bobber that was three inches long and one inch wide.�It was such a bright pink, I can't even describe it.�He was casting this thing up river and had no idea...

SK60 · SK60

I don't know about you, but in this colder damper weather I have trouble tying the dropper fly to the upper fly with cold fingers. As an aid, I use a small piece of closed cell foam cut from a 1/6" thick sheet. I run the point through the sheet and loop and tie off the tippet along the bend as usual. This w...

Topic		Started By	Replies	Views	Last Post
	Stop missing strikes! (Preview) ...with the strike-o-matic! -- Edited by vince on Wednesday 15th of April 2009 09:07:18 AM -- Edited by vince on Wednesday 15th of April 2009 09:08:33 AM	vince	2	2844	Apr 17, 2009 by lightfoot
	Knot testing: Improved Clinch, Blood and Duncan Loop (Preview) I recently tested the knots I have been using for many, many years. I discovered that the knots Ive been using were not as strong as they could have been. The three knots I tested were the three knots that I use most frequently: the improved clinch, the blood knot and the duncan loop. For my test I used 5X Um...	Nohackle	8	5927	Mar 3, 2009 by Nohackle
	Boat building (Preview) Has anyone built a pram before? Something I have wanted to do for awhile now. There are tons of plans on line but I'm not sure where to start. This sort of piggy backs on the tube versus pontoon question. I have a tube already and thought about getting a pontoon but I want one I can stand in that has a lean bar....	cole	3	1657	Dec 20, 2008 by Codym
	float tube or pontoon ... any advise for either... (Preview) Hi Gang, I've not posted in a while ... simply not had time to get out. But, I am seriously thinking about getting a float tube. Kind of excited about it!� Any advice on brand? Approach to learning? Safety?� (I plan to wear some sort of appropriate floatation device... I am a pretty strong swimmer, but no...	Lahontan	6	4533	Sep 7, 2008 by shon42073
	I have to ask (Preview) Well I'll admit I am a bit embarrassed to ask this question, but hell that's what the board is for, right?� Anyways I was out fishing the lower american last night and I was having a hell of a time getting my leech patterns tied with rabbit strips to sink, and I was having a hard time getting a few of my all mar...	WT	10	2045	Sep 7, 2008 by WT
	working a lake (Preview) The water is not moving. How do I fly fish a lake? Let it drift around. Make it move? dry or nymph. target = lmb dankes!	throwinmetal	6	1999	Aug 14, 2008 by conefish
	rod repair question ??? (Preview) Yesterday I was fishing and the threaded part of the reel seat came off my rod. I stuck it back on and it seems ok but I want to glue it to be sure. Any suggestions on what a profesional rod builder would use ? This was pretty disapointing since this is a very expensive fly rod. It has a lifetime warranty but do...	shon42073	4	1377	Jun 1, 2008 by ez
	spey casting or trick casting can be done with............. (Preview) Single hand spey or trick casting can be done with any weight rod.� I have done it on different weight rods.� The key to doing it right or smoothly is to understand that while doing the spey cast, one must use the water as an anchor.� To do it all from my own personal perspective, one must learn the SWITCH CA...	catchandrelease	0	2010	Mar 25, 2008 by catchandrelease
	spey casting with non-spey gear (Preview) I can kinda do the spey casting with my 5wt Sage. But I can't do it well with my 9wt. Its a 9foot 9wt Echo classic with WF9F Rio Clouser line + a shooting basket. I understand that one needs to have moving water, but is there anything else to consider? Is my gear too heavy? Do I need a particular type of line tap...	throwinmetal	10	2690	Mar 25, 2008 by catchandrelease
	Soft Hackle Fly Set-up and Fishing Technique (Preview) Lately I have been really interested in fishing soft hackle flies.�However, I am not exactly sure how to rig or fish soft hackle flies. I tried fishing�a few soft hackle flies�this past�Sunday.� I used a standard 9-foot tapered leader with one fly and small piece of shot about 15-inches above. I fish...	SCM	7	4665	Mar 13, 2008 by Flying Dutchman
	Rod Building ( 1 2 ) (Preview) After thinking about it for awhile, and talking about it with my wife almost nightly for too long, she got me a G.Loomis GL3 to build.� Does anyone have any hints for a first time rod builder?� I looked at the directions today, and well they are about as helpful as a turd in a punch bowl.� Thanks for any help...	WT	31	3106	Mar 10, 2008 by ez
	strike indicator????? (Preview) When does a strike indicator become just a bobber?� I have never used strike indicators and I have nothing against them but, I saw a guy today using� a bobber that was three inches long and one inch wide.�It was such a bright pink, I can't even describe it.�He was casting this thing up river and had no idea...	Tug	21	2360	Feb 22, 2008 by Packrat
	Tying droppers to the first fly (Preview) I don't know about you, but in this colder damper weather I have trouble tying the dropper fly to the upper fly with cold fingers. As an aid, I use a small piece of closed cell foam cut from a 1/6" thick sheet. I run the point through the sheet and loop and tie off the tippet along the bend as usual. This w...	SK60	8	2692	Dec 7, 2007 by cole
«First < 1 2 \| Page of 2 sorted by